Pixels to Feet Converter

Pixels to Feet Converter

72
150
300
Other

How to Use the Pixels to Feet Converter:

  1. Access the Converter: Visit our website and find the Pixels to Feet Converter. The intuitive interface will be readily available for your convenience.
  2. Enter Pixel Measurement: In the “Pixels” section, input the number of pixels you wish to convert to feet. For example, if you have an image that is 800 pixels wide, enter “800” in the provided input field.
  3. Choose DPI/PPI Option: Select the appropriate DPI/PPI option from the given choices. The converter provides three commonly used presets: 72, 150, and 300 DPI. These presets represent the number of pixels per inch on your display. Choose the option that matches your screen’s DPI/PPI setting.
  4. Custom DPI/PPI (Optional): If your display’s DPI/PPI is not among the presets, select the “Other” option. This will reveal an input field where you can enter your custom DPI/PPI value.
  5. Click “Convert”: Hit the “Convert” button, and the Pixels to Feet Converter will perform the calculation for you. The result will be displayed in the “Feet” section, showing the corresponding measurement in feet based on the provided pixels and DPI/PPI.
  6. Reset (Optional): If you need to perform another conversion or start over, click the “Reset” button to clear the input fields and begin anew.

With these straightforward steps, you can accurately convert pixel measurements to feet, which is particularly useful for architects and designers working on projects that require precise scaling.

How to convert Pixels to Feet?

To convert Pixels to Feet, you need to know the DPI/PPI (dots per inch or pixels per inch) of the display or device you are working with. DPI/PPI represents the number of pixels displayed per inch on the screen. Once you have the DPI/PPI value, you can use the following formula to convert Pixels to Feet:

Feet = (Pixels / DPI) * 0.0833333

Here’s a step-by-step example of how to convert Pixels to Feet using the formula:

Let’s say you have an image that is 800 pixels wide, and your display has a DPI of 300.

Step 1: Determine the DPI value DPI = 300

Step 2: Apply the formula Feet = (800 pixels / 300) * 0.0833333 Feet = 2.6666667 feet

So, the width of the image is approximately 2.67 feet.

Keep in mind that different devices may have different DPI/PPI values, so the same number of pixels can have different physical sizes on different screens. To get accurate measurements, it’s essential to know the DPI/PPI of the display you are working with.